I searched the Internet exhaustively for this manual and Owner-Manuals was the least expensive...but provided an excellent reproduction within 4 hours. Very satisified.
available for me the service manual is in order!
thanks
Text excerpt from page 62 (click to view)
8666 N/B Maintenance
4. To remove the existing CPU, loosen the screw by a flat screw driver, upraise the CPU socket to unlock the CPU. (Figure 2-8)
Reassembly
t ent e cr m Se cu c Do al iT ia M nt e d fi n o C
Figure 2-8 Remove the CPU
1. Carefully, align the arrowhead corner of the CPU with the beveled corner of the socket, then insert CPU pins into the holes. Tighten the screw by a flat screwdriver to locking the CPU. 2. Connect the fan�s power cord to the system board, fit the heatsink upon the CPU and secure with four spring screws. 3. Replace the CPU cover and secure with seven screws. 4. Replace the battery pack. (Refer to section 2.3.1 Reassembly)
61